Additionally, paste this code immediately after the opening tag:

Card Vibro Air2

[Note] To use Version 1.6.5 or later, please update the firmware of your Air2 to Ver:124. You can download...

Free

Store review

[Note]
To use Version 1.6.5 or later, please update the firmware of your Air2 to Ver:124.
You can download the latest firmware from the URL below:
http://www.imv.co.jp/products/vibrograph/measure/air2/info01/index.php
Card Vibro Air2 is a WiFi portable vibrometer.
With the wireless connection, we can now safely measure the vibration of the
areas that had been difficult to access.

This vibrometer has the following functions:
1. Simultaneous Measurement - Displacement, velocity, acceleration, and
acceleration envelope for bearing assessment can be measured automatically
and simultaneously.
2. FFT Analysis - Frequency analysis can be done in the 12800dpi high
resolution.
3. Waveform Observation - Waveform of the vibration can be recorded.
4. Evaluation at the Site - Evaluation can be done according to the
international standards; vibration severity ISO10816 (JIS-B-0906), etc.
5. Continuous Monitoring - Waveform and FFT can be monitored in almost
real-time.
6. Route Setting - Measuring points are displayed in the order of being
programmed.
7. Data Saving - All data acquired can be stored.

Caution: A specific hardware is necessary to use this software.

Last update

March 19, 2020

Read more