Additionally, paste this code immediately after the opening tag:

OpenGo

By OpenGo you can access your home or building using the mobile device as a proximity card. To operate th...

Free

Store review

By OpenGo you can access your home or building using the mobile device as a proximity card.

To operate the mobile device you must have NFC on your device and Android version 4.4 or higher.

It is necessary to have the Golmar N4502/NFC access kit or the EL4502/NFC RF access module.

Enabling an access card on your mobile device, it will not lose functionality, but doubles the possibility of access:
- By OpenGo app.
- Or by the access card.

You can activate a maxium of 200 cards, every card only can be activate on a mobile device at the same time.

Add card:
You can activate a card, enabled in the system, thus to open the door of your home or building. To activate a card in a mobile device, press the plus sign icon, then the activation screen card appears, then you should approach the card to the NFC reader. Now the card is activated on your device and can open the door of your house or building without opening the app.

Remove card:
The access card should be disabled in the current device, prior to use it in a new one device. Only 1 device is allowed per card. To disable the card, press the X-shaped icon, the device will show the screen to disable, then approach the card activated on that device to the NFC reader, now you can activate the card in another device.

Disable card:
Disable a card in case of loss or inability to reactivate on another device. To disable a card hold the X-shaped icon, the device'll indicate by a message that if you continue can not activate the card on another device, pressing accept then the card of your device will be disabled. Now you can activate a new card. Should you find the card again, you can enable again in the same device following the instructions in step Add card.

Last update

Nov. 26, 2019

Read more