Additionally, paste this code immediately after the opening tag:

Reprap Control

This app is a G-code sender with graphical user interface to manually control your reprap 3D printer machine. ...

Free

Store review

This app is a G-code sender with graphical user interface to manually control your reprap 3D printer machine.

Features :
- Homing and Moving the X, Y and Z Axis
- Moving the extruder (forward / rewind the filament)
- Setting nozzle and bed temperature
- Start/pause file from SD card
- Current file status printing
- spindle or laser On/Off


Compatibility :

- Bluetooth
* Module HC-05, HC-06
* Any Bluetooth-Serial adapter (UUID 00001101-0000-1000-8000-00805f9b34fb)

- USB with OTG adapter and USB Bridge chips
* Silicon Laboratories CP210X,
* FTDI FT232
* Prolific PL2303
* Arduino
* CDC/ACM

- LinkBus (Ethernet to UART device)
* see http://devmel.com/linkbus


Communication settings :
- Baud Rate: 1200 ~ 250000
- Data Bits : 5, 6, 7 or 8
- Stop Bits 1 or 2
- Parity Bit: none, even or odd


Notes :
- Marlin firmware is advised
- There is no advertisement
- USB Host support can be activated (rooted devices only)
- Open Source https://github.com/devmel/ReprapControl-Android

Last update

Nov. 30, 2019

Read more